Cover Glass

Heat tempered Chemically Strengthened Aluminosilicate
Gorilla
Coating: AR, AG, Hydrophobic
Thickness: 1mm to 6mm

Welcome Custom Design

NVIS Light Guides

Columated Micro‐Prism Dual Mode Light Guide, NVIS/Day Mode

(Scroll down for explanation) Welcome Custom Design

NVIS Filters

Meet Mil‐L‐3009 Type 1 Class B for Multi‐Color Displays

Welcome Custom Design

Optical bonding Services

Processes: Wet, Dry and UV Sizes: From 1.5” to 98”
Bond Thickness: 0.2mm to 1.0mm
Meet 40,000 Ft. and +80C

Welcome Custom Design

A/D board

HDMI, DVI, VGA; MCCS Control ‐30C to +70C
Dimming Ratio: >1,300:1

Welcome Custom Design

Backlight

Light Guides High Efficient LED Bar Films

Welcome Custom Design

Touch Screens

PCT IR 5‐Wire Resistor Most Manufacturers, Models and Sizes

Welcome Custom Design

LCDs

Most Manufacturers, Models and Sizes

Welcome Custom Design

Cables

LVDS cables Power Cables Special Cables

Welcome Custom Design

Product Support and Warranty in the U.S.

Insync Peripherals Corp. 22951 La Cadena Dr., Laguna Hills, CA 92653 USA.
www.insyncperipherals.com

Factory View

Principle Operation of Single Micro‐Prism Light Guide

Dual Mode, NVIS Mode and Day Mode

  1. Use a monitor to illustrate the principle operation of the light guide.
  2. NVIS Compatibility: Mil‐L‐3009 and Sunlight Readability for NVIS meeting Mil‐L‐3009, Type 1, Class B for Multi‐Color Displays.
  3. See NVIS data on Appendix A at the end of this white‐up.
  4. For Day mode, we will use high efficiency LED light bar and micro‐prism light guide backlight to output 1,200 nits to the viewer plus optical bonding to remove all internal layer reflections.

To accomplish both Day mode and NVIS mode, we use a single micro‐prism light guide configured shown in drawing below. The temperature of the micro‐prism light guide material exceeds +95C without deformation.

In the drawing, two light expenders are positioned along the two short sides of the main light guide to channel NVIS light from the four LEDs during nighttime viewing. On each of the light expender, two LEDs and two NVIS filters form two LED/filter pairs. The NVIS filter filters the light from the LED and spread the NVIS light across the entire light guide though the light expanders.

Appendix A